Lightweight portable powered speakers with legendary QSC amplifier power and reliability
1000 watt continuous Class D power modules in all models
Extensive DSP enhances system performance
Attractive and professional appearance
Rugged ABS enclosures
Powder coated steel grille
Comfortable ergonomic handles
35 mm pole sockets with Tilt-Direct™ (fullrange models)
DMT™ (Directivity Matched Transition) provides for matched LF and HF coverage across the entire listening area, eliminating unnatural "dead" or "hot" frequency zones.
Intrinsic Correction™, first featured in our high-end line-array products maps 65-75 spacially-averaged measurements to IIR and FIR filters that actively adjust time, frequency and amplitude response to a maximally flat bandpass target. The result is a speaker that behaves equally well across the entire sound field.
DEEP™ and excursion limiting allow for extended low-frequency response by actively managing low-frequency transients without degradation of the underlying signal or adjacent frequencies.
GuardRail™ protection, first introduced on our GX Series amplifiers protects both the amplifier module and your performance from unnatural and destructive clipping.
8" cone transducer
1.75" diaphragm compression driver
|Frequency Response (-6 dB)||66 Hz - 18 kHz|
|Frequency Range (-10 dB)||61 Hz - 20 kHz|
|Nominal Coverage (-6 dB)||105° conical|
|Maximum SPL1||127 dB peak
|Power Output2||1000 W continuous Class D
(500 W LF, 500 W HF)
2000 W peak
|Input Impedance (ohms)||XLR / ¼": 40k balanced / 20k unbalanced
XLR / ¼" MIC mode: 2260 balanced
|Controls||Power, Gain A, Gain B, Mic/Line, LF Mode (Ext Sub/Norm/DEEP™), HF Mode (Flat/Vocal Boost), Front LED (On/Off/Limit)|
|Indicators||Power, Signal A, Signal B, Standby, Limit, Mic|
|Connectors||Balanced female XLR/¼" line/mic level input, Balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out , Balanced male XLR "mix" out, Stereo RCA line level input, Remote gain control, Locking IEC power connector|
|Cooling||On demand, 50 mm variable speed fan|
|Amplifier Protection||Thermal limiting, output overcurrent, overtemperature muting, GuardRail™|
|Transducer Protection||Thermal limiting, excursion limiting|
|AC Power Input||Universal power supply 100 - 240 VAC, 50 - 60 Hz|
|AC Power Consumption
|100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
|Material||Impact resistant ABS|
|Grille||Black powder coated 18 gauge steel|
|Dimensions (HWD)||17.7" x 11" x 10.6"
450 mm x 280 mm x 269 mm
|Weight (Net)||27 lb / 12.2 kg|
|Available Accessories||K8 TOTE, K8 YOKE, K SERIES M10 KIT|