WideLine-8 Line Array Speakers - Batts Audio, Video and Lighting
 

WideLine-8 Line Array Speakers

QSC Audio, Inc.

Designed for the most demanding concert and installation audio professionals, the WideLine-8 system sets new standards for astonishing acoustical performance and compact size. 

Line arrays are increasingly employed in a wider range of venues and applications. Frequently these venues have height or sightline restrictions that limit the placement and size of the array. Rising fuel costs are putting pressure on touring system providers to downsize their transportation requirements. At the same time, client and audience expectations for audio performance has never been higher. To meet these needs, QSC embarked on a program to develop the most compact, highest output line array speaker system available. 

QSC's WideLine-8 packs full size line array performance into an ultra compact package measuring less than 20" (508 mm) wide and 9" (229 mm) high. The WideLine-8 applies to audio the classic hot rod, high performance formula – putting the most horsepower available into the smallest chassis possible. 

Each tri-amplified WideLine-8 element uses a pair of high-power, neodymium magnet, 8" low-frequency drivers. Both cover low frequencies while only one extends into the midrange, thus maintaining horizontal dispersion control at crossover. High frequencies are handled by a premium, 3" diaphragm, neodymium compression driver mounted to QSC's patented, 140° multiple aperture diffraction waveguide. WideLine signature wide coverage delivers a broader stereo image, reduces the need for supplemental fill speakers and allows more placement options. 

The waveguide exit extends nearly to the top and bottom of the enclosure to create a continuous acoustical source with minimal discontinuities between adjacent elements resulting in greatly reduced destructive interaction. 

The WideLine-8 sub sets a new benchmark for extraordinary acoustic output from a miniscule enclosure. At first glance, the enclosure seems too small to even house its pair of 4" voice-coil, long-excursion 12" woofers, yet it produces 135 dB (peak) SPL and has LF extension to 32 Hz, with the punch needed for popular music. The extremely low profile of the WL212-sw sub (less than 15") also makes it a great choice for installed and portable use under a stage or in other tight quarters. The 4th order bandpass design matches the width of the WideLine-8 elements allowing it to be flown inline with or behind a WideLine-8 array. 

Premium materials are used throughout the system. The enclosure is constructed of Baltic birch plywood and coated in an environmentally friendly, waterborne polymer finish that is field repairable. To keep the weight to a minimum and prevent rust, suspension fittings are made of aluminum. 

An elegantly simple 4-point suspension system combined with lightweight, compact size and excellent handling ergonomics mean that a one person crew can easily deploy an array. A single AF3082-L array frame suspends up to twenty-four line array elements or up to twelve line array elements plus four subwoofers. The WideLine-8 system is equally at home in the air or ground stacked. 

Special attention is given to ground-stacked applications. The WideLine-8 sub suspension system includes a unique provision that allows the lowest line array element stacked over a sub to be tilted up or down by as much as 10°, offering better coverage of listeners near the stage. WideLine-8 subs may be used as a base for stacking up to six WideLine-8 elements.

Features of the WL3082

  • Extraordinarily compact (only 20" / 508 mm wide) and lightweight (38 lbs / 17.2 kg)

  • High acoustic output (133 dB SPL peak)

  • Wide 140° horizontal coverage

  • High power, 8" neodymium LF / MF drivers provide low-frequency extension to 62 Hz without subwoofers

  • 3" diaphragm compression driver on QSC's patented 140° multiple diffraction aperture waveguide (Patent No. 7,177,437)

  • Patented (D576,660) side-mounted vent ports designed for double duty as handles

  • Simple, easy-to-use rigging system supports arrays of up to 12 units with 10:1 design factor

  • Flexible ground stack capability

  • Fully supported in EASE and EASE Focus acoustic software

Features of the WL212-sw

  • Dual 12" subwoofer in a 4th order bandpass enclosure

  • 135 dB SPL peak output capability

  • Frequency range to 32 Hz (-10 db down point)

  • May be suspended at the top of a WL3082 array or behind the array

  • Integral suspension hardware also supports WL3082 in ground stack applications


SPECIFICATIONS WL3082 WL212-sw
Configuration Dual 8", 3-way, tri-amp line-array
Dual 12", 4th order bandpass subwoofer
Transducers
  High-frequency

  Low-frequency

1.4" exit, 3" diaphragm, neodymium magnet compression driver
Dual, 8" woofer, 2.5" voice coil

-

Dual, 12" woofer with a 4" voice coil, ceramic magnet assembly
Frequency Response (±3 dB) 68 Hz - 18 kHz 40 Hz - 100 Hz
Frequency Range (-10 dB) 62 Hz - 20 kHz 32 Hz - 107 Hz
Nominal Impedance HF: 16 ohms 
MF: 16 ohms
LF: 16 ohms


SUB: 4 ohms
Continuous Power Capacity1 HF: 85 W
MF: 250 W
LF: 250 W


LF: 1100 W
Maximum Output, Continuous / Peak
(dB SPL at 1 m)
HF: 127 dB SPL / 133 dB SPL
MF: 122 dB SPL / 128 dB SPL
LF: 122 dB SPL / 128 dB SPL


LF: 129 dB SPL / 135 dB SPL
Nominal Coverage H: 140°
V: dependent on number of elements used
-
-
Enclosure Type Ported, trapezoidal 4th order bandpass
Enclosure Material 15 mm birch plywood 15 mm birch plywood
Finish Available in black (WL3082) or white (WL3082-WH) paintable Available in black (WL212-sw) or white (WL212-sw-WH) paintable
Grille Perforated, 16AWG steel, backed with black/white cloth fabric -
Connectors 2 x NL8 in parallel 2 x NL8 in parallel
Pin Outs 1+/1- NC
2+/2- LF
3+/3- MF
4+/4- HF
1+/1- Sub
2+/2- NC
3+/3- NC
4+/4- NC
Attachment Points Integral, side plate adjustable rigging system, vertical splay adjustable
in 1° increments from 0° - 10°
Integral, non-adjustable
Weight (Net) 38 lbs (17 kg) 109 lbs (49.4 kg)
Weight (Shipping) 45.5 lbs (20.7 kg) 125 lbs (56.7 kg)
Dimensions (HWD) 9" x 20" x 16"
229 mm x 508 mm x 406 mm
15" x 20" x 29"
381 mm x 508 mm x 737 mm
Available Accessories AF3082-S
AF3082-L
EB3082
CP3082-4
PB3082
AF8-10
AF3082-L
CP212-2
AF3082-S